Construction cellulose fiber can easily disperse in the thermal insulation material and form three dimensional space, and it can absorb water 6-8 times than its own weight. This character of combination improves operating performance, anti-sliding performance of the material, and speeds up the construction progress.


● Viscosity reduces with the increase of sheer rate (pumping, mixing, construction) Low sheer rate will result in increasing of viscosity immediately. Under stationary state, the viscosity will back to original.
● The gelled system depends on the length of the fiber. The longer the fiber, the more obvious the thickening effect.
● The cross-linking system formed through the establishment of three-dimensional fiber skeleton to make the cellulose fiber gain higher stability.
● Filling in the joint prats and the cracks enhance closing cracks effect.
● Cellulose fiber in many applications plays a role of anti-cracking.
● Due to the extended opening times,cellulose fiber can reduce the formation of skin.
● On the strong absorption level,cellulose fiber still has a good operating performance.
● It can put the remaining water within the capillary of fiber and make the freezing point down to -70 degree.



● Thermal insulation mortar 0.4-0.5% per ton
● Tile adhesive:0.3-0.5% per ton.
● Insulation mortar layer 0.2-0.3% per ton
● Caulking agent 0.4-0.5% per ton
● Exterior wall putty 0.3-0.5% per ton
● Gypsum plaster 0.2-0.4% per ton